Graco SNUGRIDE 30 PD115793C - Manual (Page 35)

4. Tighten the vehicle seat belt. To
create a secure installation, push
down hard with your free hand on
the infant restraint © and pull and
tighten the vehicle belt.
5. Check carseat is level: Red level
line on the warning label MUST
be level with the ground ©.
6. Test infant restraint for secure
installation as described in
infant restraint “Final Safety
Check” page 41.
7.2 Installing the Infant Restraint
and Base Using Vehicle Belt
1. Make sure vehicle is on level ground
O so that the level indicator on base
can be used to properly recline the
infant restraint.
Place the base in a rear-facing position ©
on a vehicle seat.
35