Graco SNUGRIDE 30 PD115793C - Manual (Page 16)

1. Press handle adjustment buttons on both
sides of handle O­
2. Rotate handle until it clicks into any of the
5 positions:
Position A: MUST be used
when carrying by handle,
Position B,C, D: are convenience
positions,
Position E: is the sitting position,
NEVER use position B or C in
the vehicle.
BOTH handle adjustment
buttons must pop out to lock
handle in place ©.
3. Push and pull on the handle to
be sure it is locked firmly in
position.
4.1 Adjusting Handle
o
0
4.2 Removing and Attaching Infant Restraint
To remove, squeeze release handle at back of
infant restraint and lift out of base as shown ©.
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull up
on infant restraint to be sure it is latched
firmly into base.
16