Graco SNUGRIDE 30 PD115793C User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

5. Snap harness clip pieces together O.

6. Pull on harness adjustment strap to

tighten straps as shown ©. CHECK that

both straps are flat and snug on

shoulders and thighs.

7. Position harness clip in middle of chest,

level with armpits and away from the

neck ©.

8. SAFETY CHECK:

a) MAKE SURE the top of the childs'

head is at least 1" below the top of the infant restraint

b) CHECK that harness straps are not twisted.

c) CHECK that the harness is snug. You should

not be able to pinch the harness if it

is snug. A snug strap should not allow any

slack. It lies in a relatively straight line without

sagging. It does not press on the child’s flesh

or push the child’s body into an unnatural