Contents of the letters are – Kenwood KR-1000B User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Example 3: Eight programs in the memory and
their executions
Before starting the explanation of the timer programmed
operations as shown in the figure below, the program
modes stored in the PROGRAM MODE COMMANDER keys
marked M-1 through M-4 will be referred to by the letters
(A),(B),(C)and (D),
Contents of the letters are;
(A) Signal flowchart combined with FM 1 stored in the
STATIONS key marked 1 ................. stored in M-1
(B) Signal flowchart combined with FM 2 stored in the
STATIONS key marked 2..................stored in M-2
(C) Signal flowchart combined with FM 3 stored in the
STATIONS key marked 3..................stored in M-3
(D) Signal flowchart combined with AM 1 stored in the
STATIONS key marked 1..................stored in M-4
B:00
9:00
10:00
11:00
13:00
13:00 l« 00
15:00
16:00
17:00 17:30 18:00
19:00
9:30
Example of the timer programs
How to write the above programs into the memory
CLOCK TMOOON Avrooff
rKOOl CMCR -y
«TV LOM Awro HAttUAL CLtAll
■ These numbers refer to the step numbers on
the following.
Proceed as follows:
O
Press the DAY key to define the day when the programs
are to be executed.
Q Press the HOUR key to set the hour indication to "9".
^ Press the MINUTE key to set the minute indication to
"OO".
O Press the program mode definition key marked 1 to de
fine the program mode (A) stored in M-1.
0 Press the TIMER (ENTER) key to store the above defini
tion into the memory......
(first program)
^ Press the MINUTE key to set the minute indication to
"30".
O Press the program mode definition key marked 2 to de
fine the program mode (B) stored in M-2.
0 Press the TIMER (ENTER) key to store the above defini
tion into the memory......
(second program)
O Press the HOUR key to set the hour indication to "10".
® Press the MINUTE key to set the minute indication to
"
00
".
^ Press the program mode definition key marked 3 to de
fine the program mode (C) stored in M-3.
® Press the TIMER (ENTER) key to store the above defini
tion into the memory......
(third program)
® Press the HOUR key to set the hour indication to "11".
^ Press the turn-off definition key marked OFF to define
the turn-off instruction.
® Press the TIMER (ENTER) key to store the above defini
tion into the memory......
(fourth program)
^ Press the HOUR key to set the hour indication to "13".
O Press the program mode definition key marked 1 to de^
fine the program mode (A) stored in M-1.
^ Press the TIMER (ENTER) key to store the above defini
tion into the memory......
(fifth program)
0 Press the HOUR key to set the hour indication to "14".
^ Press the program mode definition key marked 4 to de
fine the program mode (D) stored in M-4.
^ Press the TIMER (ENTER) key to store the above defini
tion into the memory......
(sixth program)
® Press the HOUR key to set the hour indication to "15".
® Press the turn-off instruction key marked OFF to define
the turn-off instruction.
^ Press the TIMER (ENTER) key to store the above defini
tion into the memory......
(seventh program)
® Press the HOUR key to set the hour indication to "17".
® Press the MINUTE key to set the minute indication to
"30".
^ Press the program mode definition key marked LAST
MODE or 4 to define the program mode used before
the power was last turned off.
® Press the TIMER (ENTER) key to store the above defini
tion into the memory......
(eighth program)
18 KR-IOOOB(K)