Kenwood CD-323M User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CD-323M [En]

Make connections as shown below.

When connecting the related system components, refer

also to the instruction manuals of the related components.
Do not plug in the power iead until all connections are com-
pieted.

8e sure to use this unit placed on a level surface.

Malfunction of microcomputer

If operation is not possible or erroneous display

appears even though all connections have been

made properly, reset the microcomputer refer
ring to "In case of difficulty".

Digital component (MD,DAT, etc.)

1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.

2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet, Plugging/unplugging

connection cords without removal of the power cord can cause malfunctions or damage to the unit.