Kenwood CD-323M - Manual (Page 29)

LU-ayjM [tnj
Operation to
The microcompular may maNimction (impossibility to operate,
erroneous dtoiriey* ate.) when the connection cords are un­
plugged whHa pawar b ON or due to an external factor. In this
case, execute tlwfahawfiig method to reset the microcomputer
and return it to normal ссинМоп.
Unplug the power aerd from the power socket and plug the
power cord into the ooekat again.
To reset the registered contents
The registered contents for title, music type, user file and best
selection can be reset by the following procedure.
Unplug the power cord from the power socket, and while
holding the ■ key depressed, plug the power cord into the
socket again.
No power is sppBsd with the POWER key ON. e Power plug is loosely connected,
e With the power plug connected to the switched
AC outlet of an amplifier, the power of the
amplifier is turned off.
e Insert the power plug firmly to the AC outlet,
e Insert the power plug to the wall AC outlet.
Disc is loaded, piaysr does not play. eDisc is loose.
eDisc is dirty.
eDisc is cracked.
eCondensationoccured on the optical lens unit.
e Insert disc properly. -*рй£1
eWipe off the dust on the surface of the disc
referring to "Disc handling precautions".
e Replace the disc with a new one.
e Leave the player for about 1 hour so that the
condensation is removed.
No sound. eDisc is not loaded.
ePIay mode is not entered (The play indicator is
not lit).
eDisc is too dirty.
eDisc is cracked.
eThe connection cords are inserted loosely.
• Load a disc and press the ►/!! key.
• Press the ►/ii key
• Wipe off the dust on the disc surface referring
to "Disc handling precautions".
• Replace the disc with a new one.
•Connect all connection cords firmly, —СД
Music is interrupted. (Sound is skipped.) eDisc is too dirty.
eDisc is cracked.
eOscillation is applied to this unit.
•Wipe off the dust on the disc surface refermq
to "Disc handing precautions". —LiJ
• Replace the disc with a new one.
• Try selecting a place where no strong vibra­
tions occur by changing the installation place,
etc.
Disc selection is not possible. eMUSIC TYPE PLAY mode is selected. •Press the MODE key to quit MUSIC ТУРЕ
PLAY mode.
Disc begins to play when power is switched
ON. eThe TIMER PLAY switch is set to ON. • Set the TIMER PLAY switch to OFF unless
timer playback is required,