Remote control operation (dp-2060 only), Operating procedure, I loading batteries i – Kenwood DP-2060 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Remote control operation (DP-2060 only)

The operations of each are the same as those of the keys in the unit.

CHECK key

P.MODE key

EDIT key

REPEAT key

Search keys

I Loading batteries

Operating procedure

When twooperation keyson the remotecontrolunitarepressed successively,

press each key securely reserving an interval of more than 1 second for each

Notes;

. ■

1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.

2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light

sensor. In such a case, change the system installation position to prevent the malfunction.

DP-2060/DP-1060 tEni

This manual is related to the following products:

DP-1060