Kenwood KC-993 User Manual
Kc-993
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- KC-993
- Introduction
- IMPORTANT SAFEGUARDS
- Controls and indicators
- System connections
- System control operation
- Operating instructions
- Press the MUTE key.
- I Press the CD DIRECT key.
- 2 PIfly the CD player.
- Set cassette deck 1 to the record-pause mode and play the source to be recorded.
- 3 Press the CD DIRECT key.
- start recording on the cassette deck connected to the TAPE 1 jacks.
- 0 Play the CD player.
- Operating instructions
- To compensate the sound for general home use
- ^ Select a desired equalizer pattern.
- 2 Start recording.
- To compensate the sound for use in a car or with stereo headphones.
- Select CAR ST or HEADPHONE ST according
- 2 start recording.
- Operation for components connected to the TAPE 2/ADAPTOR jacks
- Graphic equalizer operation
- ^ Set the equalizer to flat.
- 2 Select a desired equalizer pattern.
- Press the AI AUTO key.
- To cancel the equalizer effect
- Display function
- Graphic equalizer operation
- J Display the graphic equalizer curve.
- 2 Select the frequency band to be adjusted.
- O Adjust the level of the selected frequency
- A Repeat steps 2 and 3 for other frequency ^ bands, if necessary.
- ^ Create a desired equalizer pattern.
- 2 Press the MEMORY key.
- 2 Press the preset key.
- To return to the original equalizer pattern
- Remote control operation
- In case of difficulty
- Specifications