Press the macro key, Execute the macro play, Go to step 2 within 3 seconds – Kenwood RC-R0905 User Manual
Page 12: Executing an automatic
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Keys or controls used m this operation.
Executing an automatic ^
Press the MACRO key.
Execute the macro play.
Press the VIDEO, AUDIO, or TV
key to execute the correspond
ing macro play.
VIDEO
AUDIO
o
TV
0^0
Go to step 2 within 3 seconds.
• "MACRO" appears in the front panel and on-screen display and the pre
programmed macro is performed:
VIDEO — "MACRO 1", AUDIO — "MACRO 2", TV — "MACRO 3"
• The remote control flashes once for each command output.
• The remote control will output OSD information to tell you the status
of the macro {for 1090VR}.
• Some devices take up to 1 second to power on. The macro function has
an automatic delay after any power function output.
• Pressing a button other than AUDIO, VIDEO, or TV cancels the macro
program mode.
When VIDEO IS pressed
SP CD
BOOM CD
f\/I ( I I MM
I I r"i I I (