Sharp AX-1200 - Manual (Page 41)

L
t
JJiB LJiy 0JLNJ yji 1_________
The following situations are normal and are not signs that the oven is malfunctioning.
QUESTION / SITUATION ANSWER
Control panel /
power supply The display is black / blank. * Check that power plug is connected to a suitable wall
outlet. See page 4.
* Check that fuse or circuit breaker is functioning properly.
It not, correct.
* Disconnect the oven from the power source, wait one
minute and then plug into the wall outlet. It the problem
exists, consult a Sharp Authorized Servicer.
The display is fine but START
will not function when pressed.
* Open the door and close. Is the oven light oft? Press
START again.
* It the display says, "Wait. Oven is too warm to use.", be
sure to wait until it disappears and then press START.
Electrical power supply is
interrupted during cooking.
The cooking program will be cancelled. Continue to cook
with manual operation. Check food carefully as it cooks.
Oven light is oft during PROOF. Normal operation to prevent bread dough from drying on
the surface.
Oven light is off during
descaling.
This is normal operation. See page 15.
Oven light is oft when door is
opened.
Oven light will turn OFF if the door is open for more than 5
minutes.
The display backlight is oft. Sleep Mode may be ON. Press any pad, turn the Dial or
open/close the door to activate display backlight. See page
35 to cancel Sleep Mode.
39