Sharp AX-1200 - Manual (Page 40)

T R O U B L E S H O O T I I I I G C H A R
If EE is displayed or you think the oven is not working properly, check the chart below before consulting a Sharp
Authorized Servicer. This will help to prevent unnecessary service calls.
TROUBLESHOOTING CHART
ERROR MESSAGE / INFORMATION MESSAGE
MESSAGE ON DISPLAY ACTION
ERROR
MESSAGE
EE Due to technical error, call service for your nearest Sharp
Authorized Servicer.
SENSOR
ERROR
Finish cooking by time.
Press Clear. The sensor does not detect vapor properly in microwave
sensor mode. Press
Stop/Clear and finish cooking using
manual time.
INFORMATION
MESSAGE
Wait.
Oven is too warm to use.
The oven is too hot to use Microwave Defrost or Steam Proof.
Remove food from oven and allow to cool until the message
clears.
Water is frozen. The oven may not operate properly.
Operate the oven with Convection Broil without food and
preheat for 5 minutes.
See page 29.
Now cooling. After cooking, the oven and the parts will be hot.
Now cooling is shown in the display until the oven cavity
has cooled. The cooling fan may continue to operate up to
13 minutes.
Now cooling will disappear when the oven has cooled.
If you wish to use the warm oven, simply press Stop/Clear.
Replace drip tray. Remove and replace the drip tray correctly.
See page 13.
In case the drip tray is not installed correctly. Replace drip
tray will be shown in the display.
Empty drip tray and replace. Empty drip tray and replace will be shown in the display
when water remains in the drip tray. You must empty the drip
tray and replace it before SuperSteam Convection or Steam
Cooking will start. See page 13.
Descaling is necessary. Follow step-by-step instructions for descaling.
See page 15.
Fill water reservoir. Remove reservoir and fill with water to the 2 mark.
Replace and push firmly into place.
Hot The oven cabinet and oven cavity are very hot.
Pay extra attention not to burn yourself.
38