Timer and sleep operation (continued), Sleep operation, To use timer and sleep operation together – Sharp CD-ES99 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD-ES900
CD-ES99
Timer and sleep operation (continued)
■ Sleep operation
The radio, compact disc and cassette tape can ail
auiomaticaliy.
be turned off
1
Play back the desired sound source.
2
Press the CLOCK/TIWIER button.
3
Within 10 seconds, press the
hM or l»^ button to select
"SLEEP", and press the MEMO-
RY/SET button.
4
Press the
•**
or ►► W button to select the time,
(Maximum: 3 hours - Minimum: 1 minute)
• 3 hours - 5 minutes 5-minute intervals
• 5 minutes - 1 minute -r 1 -minute intervals
5
Press the MEMORY/SET but
ton,
"SLEEP" will appear.
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op
eration finishes.
To confirm the remaining sleep time:
1 While "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the l-W or ►► WH button to select
"SLEEP X : XX".
"X : XX" is sleep remaining time.
• The remaining sleep time is displayed for about 10 seconds.
• You can change the remaining sleep time while it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 While "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or ►► W button to select
"SLEEP OFF", and press the MEMORY/SET button.
■ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fail asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can faii asleep listening to the CD and record radio
programs while sleeping.
1 Set the sleep time (see left, steps 1 - 5).
2 While the sleep timer is set. set the timer playback or recording
(steps 2 - 1 0 , pages 27 - 28).
Timer playback or
Sieep timer setting recording setting
End time
f,
: ( /
ó
: minute :“3 nous
//
: Desired: tirns-.-:
Sleep operation will
automatically stop.
Timer playback or recording
start time
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sieep and wake up
listening to a tape, and the length of the tape is shorter than the
sieep timer setting, timer playback or recording will not be possible.
30