Sharp CD-ES99 - Manual (Page 20)

CD-ES900
CD-ES99
Advanced CD Playback (continued)
■ Programmed play
You can choose up to 32 selections for playback in the order you
like.
1
While in the stop mode, press the ^
MEMORY/SET (MEMORY) button ^
to enter the programming save
mode.
MEMORY
........ sa ■ f ........ . ......., ^ . ' - . j " '
IplLp O n c p j o h.'i ' '
iQpir > ’'
' l~) 'n 'r ■
1 “".U IL™
2
Pressone of the © 1 - ©5 buttons
to select the desired disc.
U I f" ~~„LJ l'~
Y ©
Selected disc number
3 Press the direct search buttons .............................^---------------
on the remote control to select o 'c.
the desired track. ^—
Selected track number
You can also select a track by pressing the W or button.
4 Press the MEMORY/SET (MEMO­
RY) button to save the track
number.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMIVIER button.
6 Press the ■ button.
The total numberof memory will ap­
pear.
7 Press the ► / =■ button to start playback.
CLEAR
/DIMMER
Q
To clear the programmed selections:
Press the CLEAR/DIMMER button on the re­
mote control while the "MEMORY" indicator is
flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro­
grammed.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY"
indicator wii! disappear and all the programmed contents will be
cleared.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
or»l button.
Notes:
• When a disc with programmed tracks is ejected, the program is
automatically canceled.
• Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro­
grammed selections will not be cleared.
• During the program operation, random play is not possible.
• During programmed play, the DIRECT PLAY buttons will not
work.
20