Listening to the radio (continued), Memorizing a station, To recall a memorized station – Sharp CD-ES99 User Manual
Page 22: To scan the preset stations, To erase entire preset memory
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD-ES900
CD-ES99
Listening to the radio (continued)
■ Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
■ To recall a memorized station
Press the PRESET (v or /\) button for less than 0.5 seconds to se
lect the desired station.
1 Perform steps 1 - 3 In "Tuning" on page 21.
2 Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
H/l
I (
3 Within 30 seconds, press the PRESET (v or button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
h/i
I
I
if the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a pre
set station.
When a new station is stored in memory, the station previously
memorized will be erased.
■ To scan the preset stations
The stations saved in memory can be scanned automatioally. (Pre
set memory scan)
Press the PRESET (v or.^) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
Press the PRESET (v- or/^) button again when the desired sta
tion is located.
1
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord disconnection.
# 0
■ To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 While pressing down the ®ll button and the X-BASS/DEMO but
ton, press the CLOCK/TIMER button until "TUNER CL" appears.
•li
o
cF
22