Antenna connection, Speaker connection, Iiq ik i ^ f – Sharp CD-ES99 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD-ES900
CD-ES99
■ Antenna connection
Supplied FM antenna;
Connect the FM antenna wire io the FM 75 OHMS terminal and
position the FM antenna wire in the direction where the strongest
signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM LOOP jack. Position the
AM loop antenna for optimum reception. Place the AM loop antenna
on a shelf, etc., or attach it to a stand or a wail with screws (not sup
plied).
Installing the AM loop antenna:
< Assembling >
< Attaching to the wall >
■ Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
-Red
- Black
Caution:
Note:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Piace the antenna away from the unit for better
reception.
Use speakers with an impedance of 6 ohms or more, as lower im
pedance speakers can damage the unit.
• Do not mistake the right and the left chan
nels. The right speaker is the one on the right
side when you face the unit.
• Do not let the bare speaker wires touch
each other.
• Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
• Do not stand or sit on the speakers. You may
be injured.
■ Placing the speaker system
The left and right speakers have individual shapes. For best perfor
mance, place the speakers according to the diagram below.
Left speaker
Right speaker
Incorrect
iiQ
IK
I
^ F®
Wai
Screws (not supplied) ip
Note:
The speaker grilles are not removable.
11