Sharp CD-ES99 - Manual (Page 17)

CD-ES900
CD-ES99
• Playback will begin from track 1 on the DISC 1, After that disc fin­
ishes playing, the next disc will auiomaticaiiy play.
• After the last track on the fifth disc is played, the CD player stops
automatically.
• When there is no CD in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a CD.
To exchange other CDs while playing a disc:
Press one of the © 1 - © 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
To remove the CDs;
In the stop mode, press the © 1 - © 5 button and within 5 seconds,
press the OPEN/CLOSE button.
Caution:
• Do not place two CDs in one disc tray.
•
Do not play discs with special shapes (heart- or octagon­
shaped). It may cause malfunctions.
• Do not push the disc tray while it is moving.
• If the power fails while the tray is open, wait until the power is
restored.
• If the disc tray is stopped with force, "ER-CD20" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
• If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
• If a disc is damaged, dirty, or loaded upside down, the disc will be
skipped.
Auto power on function:
When you press any of the following buttons, the unit turns on.
• CD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
• button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
Various CD functions * •
Function
Play
Stop
Pause
Track up/
Track down
Fast for-
ward/Fast
reverse
Main unit
i
5
Remote
control
o
o
CD
/s.
MB-
CD
N/
CD
CD
N/
CD
Operation
Press in the stop
mode.
Press in the playback
mode.
Press in the playback
mode. Press the ► / w
button to resume play­
back from the paused
point.
Press in the playback
or stop mode,
if you press the button
in the stop mode,
press the ► / ^ button
to start the desired
track.
Press and hold down
in the playback mode.
Release the button to
resume playback.
Notes:
• Track up/track down and fast fonvard/fast reverse are possible
only within individual discs.
• When the end of the last track is reached during fast fon/vard,
END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re­
verse, the unit will enter the playback mode.
Last track number) 17