Recording from a cd (cds) – Sharp CD-ES99 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD-ES900
CD-ES99
© 5 (
TAPE-2
• it
■ Recording from a CD (CDs)
You can record the desired CD using the DiRECT PLAY button.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4
Press the ®ll button.
Recording will be paused.
5
Press one of the © 1 - © 5 buttons to seiect the desired disc.
Within 5 seconds, press the DIRECT PLAY button to start
recording.
• Recording is started from the selected CD. When the play
back of the last track is finished or the end of the tape is
reached, the CD and the cassette will stop automatically.
• CD playback will start approximately 7 seconds after the
tape starts.
To stop recording:
Press the ■ button.
The CD and tape will stop.
25