Sharp CD-ES99 - Manual (Page 23)

Listening to a cassette tape (TAPE 1 or TAPE 2)
■ Tape playback
Before playback:
• For playback, use normal or low-noise tapes for the
best sound. (Metal or CrO. tapes are not recom­
mended.)
• Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
• Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
rasgi.
i^
■
O
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette com­
partment by pushing the
area marked
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played fac­
ing towards you.
I TAPE 1 I I TAPE 2 I
4
Press the TAPE (1 — 2) button to select the cassette you
want to listen to.
<;:i>
5 Press the ^ / rs to start
playback.
Tape play indicator
CD-ES900
CD-ES99
Auto power on function:
When you press any of the following buttons, the unit turns on.
• TAPE (1 — 2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
• ► / ‘ • button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
23