On/off switch handle wiounted, Carpet/bare floor selector – Kenmore 116.32734 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ON/OFF SWITCH
HANDLE WIOUNTED
To start the vacuum cleaner, slide the
ON/OFF switch from the OFF position to the
ON position. To stop the vacuum cieaner,
slide the switch to the OFF position.
QF'lpi /
(ir /
A
¡MJ
1
Sslecior
^ Window
T I
t:ACiKir^
Tuc
uakum
KCLCMOiRO i nCi riMlMLILC2
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand.
CARPET/BARE FLOOR SELECTOR
The Carpet/Bare Floor selector should be
placed in BARE FLOOR position when
using cleaner on bare floors and when
using tools* When the selector is in the
BARE FLOOR position the agitators do
not rotate.
The Selector should be placed in CARPET
position when using cleaner on carpeted
floors.
To operate selector, place cleaner in
upright position. Rotate the Carpet-Bare
Floor selector to the rear for BARE
FLOOR position,
To resume carpet cleaning rotate selector
forward to CARPET position
Take care when selecting either position
to ensure selector is pushed fully and
quickly as possible to desired position