Kenmore 116.32734 - Manual (Page 19)

LIGHT BULB CHANGING
WARNING
f^tiiriCol i*!lilwN»K \*rr I liljlifliy
Hazard
Disconnect electrical supply before
servicing or cleaning the unit
in Hn i^ntilH fPQiilf In p I pt - I PilWIIl!? 1,1«» 2SIt# ltSi9l«lfi ill CSICSI«»
trical shock or personal injury from
IG3n6r SUCIQGOiy olRriliiQ«
TO REMOVE LIGHT BULB
Disconnect power cord from electrical oiit-
iet. Lower handle to lay vacuum flat.
Flat
Screwdriver
Headlight
Lem
I Pry out light
, \ lens at
^ slots.
Do not use a bulb rated over 9W
(13V). During extended use, heat from
the bulb could overheat surrounding
: plastic parts.
Remove the light
bulb by pulling
straight out.
To replace
the light
bulb care­
fully insert
securely
into slot.
Replace lens cover by inserting bottom tab
of lens into slot then applying pressure to
top tabs with a screwdriver. A “popping"
sound indicates lens is snapped properly in
place.
Note: See PARTS AND FEATURES for bulb
number.
CAUTION
Do not plug in or turn on until the
vacuum is completely reassem­
bled.
AGITATOR CLEANING
A
Electrical Shock Or Personal Injury
Hazard
nScf*‘i^rinpi'f ciirtfilv KpfATP iu»ioik#wffii t cf ti I ltd I diri inpci i\ii c!
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from clean­
er or agitator suddenly starting.
To clean agitator turn vacuum over, cut off
any carpet pile and lint entangled around
agitator with a pair of scissors in the slots
provided. Remove hair, string, lint and other
debris from the agitator.
19