Canon A560 User Manual
Page 87
85
Tr
ou
ble
sh
oot
ing
Image is blurred or out of focus.
The camera moves when
the shutter button is
pressed.
z
Confirm the procedures in
“
appears”
AF-assist Beam is set to
[Off].
z
In dark places where it is difficult
for the camera to focus, the AF-
assist Beam will emit to assist
focusing. As the AF-assist Beam
will not function when turned off,
set it [On] to activate it
Take care not to obstruct the AF-
assist Beam with your hand when
used.
Subject is out of focal
range.
z
Shoot with the subject at the
correct focusing distance
.
The subject is hard to
focus on.
z
Use the focus lock or AF lock to
shoot
.
Subject in recorded image is too dark.
Insufficient light for
shooting.
z
Set the flash to
(Flash on)
(Basic Guide p. 14).
The subject is
underexposed because
the surroundings are too
bright.
z
Set the exposure compensation to
a positive (+) setting
.
z
Use the AE lock or spot metering
function
.
Subject is too far away for
flash to reach.
z
Shoot within correct flash range of
the subject when using the built-in
flash
z
Raise the ISO speed and then
shoot
.