Canon A560 - Manual (Page 75)

73
P
lay
b
a
ck
/E
ra
si
n
g
z When the camera is set to shooting mode, you can take
pictures while displaying images on the television.
z The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards
(p. 23) . The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and
others
If the video system is set incorrectly, the camera output may
not display properly.
Erasing All Images
z Note that erased images cannot be recovered. Exercise
adequate caution before erasing an image.
z Protected images cannot be erased with this function.
1
(Play) Menu .
See Menus and Settings (p. 19) .
2
Select [OK] and press .
z To exit instead of erasing, select [Cancel].
Please format the memory card when you want to erase not
only image data but also all the data contained on the memory
card
(p. 25) .