Check list of all step-by-step guides to install – Kenmore 625.34859 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 1
WATER SOFTENER START-UP
1B.
CHECK LIST OF ALL STEP-BY-STEP GUIDES TO INSTALL
Refer to the Installation Manual, part no. 7159931, for
step-by-step guides.
To be sure you have done all the steps to install the
softener, read the following list. Page numbers
referred to are in the Installation Manual.
/ Is the house water flow going INTO the softener
valve INLET? Trace piping to be sure. See pages
10 and 11.
/ Is the plumbing bypass valve (or 3 valves) set for
SERVICE? See FIG. 12, page 19 of this manual.
/ Is the valve drain hose connected the right way,
and without sharp bends or kinks that could stop
or reduce water flow? See page 16.
/ Is the softener power cable connected to the
transformer? Is the transformer plugged into an
inside, 120V-60HZ electrical outlet? See page 20.
/ Be sure to restart the water heater. See page 20.
M