5c. water flow through the softener valve, Fast rinse cycle – Kenmore 625.34859 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5
SERVICE TECH INFORMATION
5C. WATER FLOW THROUGH THE SOFTENER VALVE
FAST RINSE CYCLE
POSITION
During FAST RINSE, the rotor & disc is positioneci so water flow enters the
resin tank through the top distributor, anci exits through the bottom
distributor, to the drain.
The electronic timer again energizes the motor to return the valve to sewice.
As the valve rotates, the position switch lever drops to open the circuit. The
valve remains positioned in service until the electronic timer initiates the
next regeneration.
27
This manual is related to the following products: