Kenmore 625.34859 - Manual (Page 19)

SECTION 4
OTHER THINGS TO KNOW
4A. DIMENSIONS/SPECIFICATIONS
FIG. 12 BYPASS VALVES
MODEL NO. 625.348570 AND 625.348590 TIMER SR CODE SR31
NOTE: Please see the rating decal for water softener operating capacity, salt usage and service flow rate/pres-
sure loss performance specifications. Performance specifications are validated by the Water Quality Associa­
tion (WQA). The rating decal is located on the rim, under the salt hole cover (see page 28).
WATER SUPPLY TO WATER SOFTENER
MINIMUM WATER SYSTEM FLOW (gpm)
MINIMUM-MAXIMUM WATER PRESSURE (psi)
MAXIMUM WATER TEMPERATURE (°F)
MAXIMUM WATER HARDNESS (gpg)
MAXMUM “CLEAR WATER” IRON (ppm)
SALT FOR WATER SOFTENER
TYPE OF SALT NEEDED Nu<
ALTERNATE TYPE OF SALT
3
OTHERS
TYPE OF ION EXCHANGE MATERIAL (resin) High Capacity
20-120 AMOUNT OF RESIN (cu.ft.) 1.0
120 REGENERATION (RECHARGE) CYCLE TIME (min.)
110 FILL 2.7-10.3
7 BRINING/BRINE RINSE 97-106
BACKWASH 7
FAST RINSE 3
st/Pellet
TOTAL REGENERATION TIME © 109.7-126.3
STORAGE CAPACITY (pounds)
Pure, evaporated, compacted
water softener salt
200
gpm = gallons per minute psi = pounds per square inch
gpg = grains per gallon ppm = parts per million
© Does not include CLEAN feature cycle times if set to ON.
19