Mount wallplate or subbase – Honeywell CT1503 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MOUNT WALLPLATE OR SUBBASE
HEATINQ
COOLING
SUBBASE
□
If mounting on outlet box, mount as shown
on appropriate figure.
□
If mounting on wall, hold wallplate or sub
base in position and mark holes on wall.
Use spirit level to make sure wallplate or sub
base will be level. Drill 3/16 in. holes and gently
tap anchors into holes until flush with the wall.
□
Position wallplate or subbase as shown in
appropriate figure, and loosely insert the
screws supplied.