Mount the thermostat – Honeywell CT1503 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MOUNT THE THERMOSTAT
□
Note the tabs on the top inside edge of the
thermostat base. These fit the slots molded
into the top of the wallplate or subbase.
□
Hang the thermostat base on the waliplate
or subbase as shown in illustration.
□
Insert the two captive mounting screws
located in the bottom corners of the thermo
stat base (see Illustration); firmly tighten.
-------------------- IMPORTANT----------------------
Do NOT cycle heating system until Step 7 is
completed.
WALLPLAie
on
'CAPTIVE
mounting
screws
THF.RMOSTAT
BASf
TAB (г^
10