Preparation, 0 = 0 ^ he a – Honeywell CT1503 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PREPARATION
Check thermostat and wallplate suitability for your heating or heating/cooling system. Refer to Table 1,
THERMOSTAT
MODEL
SUBBASE OR
WALLPLATE INCLUDED
FOR USE WITH
CT1500
199986C Wallplate
2-wire, 15 to 30 volt control circuit. For gas or oil
heating system.
CT1501
Q682A1079 Subbase
4- or 5-wire, 16 to 30 volt control circuit. For gas or
oil heating/cooling system.
CT1502
Q682B1227 Subbase
4-wire, 15 to 30 volt control circuit. For single stage
heat pump or central electric heating/cooling
systems that require the thermostat to control the
fan in heating.
CT1503
199986D Wallplate
750 millivolt single-stage heating system.
3 Thermostat must be mounted on wallplate or subbase included in package to assure operation.
□
Assemble tools required, as illustrated
WJRE
CUTTER/STRIPPER
OR
SHARP
KNIFE
IF NEEDED TO STRIP WIRES
0=0^
HE
a
SPIRIT
LEVEUTO
I.EVEC
THERMOSTAT
FOR. ACCURATE OPERATION
69
-
0273—9