Pioneer CT-S250 - Manual (Page 6)

CONNECTIONS
CONNECTING THE POWER CORD ((D)
Insert the power cord of the cassette deck into the accessory AC
outlet of your amplifier, or into a normal household outlet.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when your hands
are wet as this could cause a short circuit or electric shock. Do not
place the unit, a piece of furniture, etc., on the power cord, or pinch
the cord. Never make a knot in the cord or tie it with other cords.
The power cords should be routed such that they are not likely to
be stepped on. A damaged power cord can cause a fire or give you
an electrical shock. Check the power cord once in a while. When
you find it damaged, ask your nearest PIONEER authorized service
center or your dealer for a replacement.
LAST MEMORY FEATURE (CT-S450S only)
This unit uses non-erasable non-volatile semiconductor memory to
provide semi-permanent (about 10 years) storage of the most recent
AUTO BLE data in addition to the on/off positions of other switches
and buttons. As a result, the most recent settings are stored in the
memory even when the power cord is disconnected.
• BLE data
• FLEX (1/f) System mode (On or off)
• Meter range data
• Dolby NR system (Off, B, C or S)
• STANDBY ON/OFF
• Tape counter number data
• Display mode (On or off)
The following data is erased when the power cord is disconnected
from the power supply.
• Counter mode
• Time counter data
To clear all the memorized data and set the unit to its
original data settings
Press the mute (O) button and the DISP OFF/COUNTER MODE
button simultaneously.
6
En