Assembly instructions – Kenmore 122.1643101 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assembly Instructions
UNPACKING
5. With the aid of an assistant, lift the Firebox from the
bottom of the shipping box and place on protected flat
surface. Be careful not to damage hose and regulator.
6. Remove grill bottom panel from bottom of shipping box.
7. Refer to the Parts Lists to check that all parts are
present.
8. Inspect the grill for damage as you assemble it. Do not
assemble or operate grill if it appears damaged. If there
are damaged or missing parts, call the Grill Information
Center at 1-800-913-8999.
1. Grill Cart Assembly .
IMPORTANT: As an aid to assembly, see the Package
Contents List and Hardware Pack Contents on pages 5,
6, and 7 for pictures and sizes of grill components and
fasteners referenced by key letters in these instructions.
a) . Use 4 CC Round Head Screws and 4 DD Lock
Washers to attach Cart Brace, Left (D) to Cart Leg, Front
Left (B) and Cart Leg, Back Left (C). Attach Cart Brace,
Left (D) so that flat side will face cart interior and wide iip
faces down. See Fig. 1.
NOTE: Use Tab on Cart Leg, Front Left as indicator of
Front Side of Grill during assembly.
b) . Use 4 CC Round Head Screws and 4 DD Lock
Washers to attach Cart Brace, Right (G) to Cart Leg,
Front Right (E) and Cart Leg, Back Right (F). Attach Cart
Brace, Right (G) so that flat side will face cart interior and
wide iip faces down. See Fig. 2.
2. Wheel Assembly
a) . Attach one Swivel Caster with Brake (H) and one
Swivel Caster (I) to Bottom Panel (J) using 8 CC Round
Head Screws and 8 DD Lock Washers. See Fig. 3.
b) . Insert Wheel Axle (K) through Cart Leg, Front Right
(E) and Cart Leg, Back Right (F). Place Wheel (L), cone
side facing Leg, on each end of Axle. Secure Wheel to
Axle with 1 FF Nut and 1 GG Flat Washer.
Fig.3
8