Hardware pack contents, Preparation, Assembly instructions – Kenmore 122.1643101 User Manual
Page 7: V© csy
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hardware Pack Contents
Pack
Description
Required for assembly(pcs)
Extra
hardware (pcs)
Total
(pcs)
AA
5/32-in. X 10-mm Round Head Screw
54
2
56
BB
5/32-in. Lock Washer
54
2
56
CO
1/4-in. X 15-mm Round Head Screw
20
2
22
DD
1/4-in. Lock Washer
28
2
30
EE
Allen Key
1
-
1
FF
1/4-in. Nut
2
1
3
GG
1/4-in. Flat Washer
2
1
3
HH
1/4-in. X 61-mm Round Head Screw
8
1
9
II
1/4-in. Flat Washer
8
1
9
JJ
5/32x6mm Flat head screw
4
1
5
KK
5/32-in.X 8-mm Stage Screw
2
1
3
LL
1/4-in. X 18-mm Stage Screw
8
1
9
JJ
KK
LL
yy
&
V
©
csy
BB
CO
DD
EE
FF
GG
HH
Preparation
Before beginning assembly, make sure all parts are present. Compare parts with package contents list and
diagram above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer
service for replacement parts.
£J[>
•Tools required for Assembly.
^
Phillips Screwdriver (not included) and Wrench (not included)-
Phillips Screwdriver
Wrench
• Note: The grill right and left sides are on your right and left as you face the front of the grill.
Assembly Instructions
UNPACKING
2.
Use sleeve as a work surface to protect floor and grill
CAUTION:
Obtain the aid of an assistant when handling P^rts from scratches.
large or heavy grill components.
3.
Remove all packing materials from around grill exterior.
1. Once the top of shipping box is open, obtain the aid of 4. Open both Firebox lids and remove packing materials
an assistant and lift the cardboard sleeve up over
Firebox and components.
and components inside each Firebox chamber.
(See Next page)