Setting oven controls, Delayed timed bake, Instructions – Kenmore 790.75503 User Manual
Page 20: When the set bake time runs out
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Oven
Controls
FEATURE OVERVIEW
» Delayed Timed Bake
Delayed Timed Bake;
INSTRUCTIONS
For a Delayed Start Time and to Shut Off Automatically:
1. Be sure that the clock shows the correct time of day (example 1:30).
2. Place the food in the oven.
3. Push
BAKE TIME
"------ :------ " and the words "BAKE", "TIME" will be
displayed,
4.
Push and hold the
UP ARROW
until the desired baking time appears in the
display. The baking time can be set for any amount of time from 5 minutes to 11
hours and 59 minutes. When setting the baking time, the time will appear in the
display and increase in 5 minute increments (example 55 minutes).
5. Push
STOP TIME.
The time when the baking will stop will appear in the display
window. The words "BAKE"," STOP"and "TIME" will be displayed.
6. Push and hold the
UP ARROW
pad until the time you want the cooking to be
completed appears in the display (example 4:00).
7. Push
BAKE.
"--------- and "DELAY BAKE" will be displayed.
8. Push and hold the
UP ARROW
until the desired baking temperature appears inn
the display.
9. If the baking temperature is not set, the control will beep. "-------- and the
words " DELAY BAKE" will be displayed; the word " BAKE" will flash.
10. The control will calculate backward from the set stop time to determine when
the baking should start. The words " DELAY" and "BAKE STOP TIME" will
remain displayed.
11. The baking will come on automatically at the calculated time. The words
"DELAY" and "BAKE" will go out and "ON" will appear. The main display will
shown the oven baking time and count down by minutes until it reatches ":00".
12. To cancel the countdown, press
CLEAR OFF.
DISPLAY
shut off automatically.
When the set BAKE TIME runs out:
1. " :00" will appear in the display window and the oven
2. The control will beep 3 times.
3. The control will then continue to beep once every 10 seconds for 5 minutes or
until
CLEAR OFF
is pushed.
20