Kenmore 790.75503 - Manual (Page 10)

Control Pad
Functions Note; The appearance of your oven control may differ slightly from the one illustrated
below. However, all functions are the same.
READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
Detailed
instructions for each function follow later in this book.
For satisfactory use of your oven, become familiar with the various functions of the oven as
described below.
BAKE
Used to enter the
normal baking mode
CONV. BAKE/ROAST
Used to enter the
convection baking
or roasting mode
CLEAN
Used to select the
self-cleaning mode
VARI BROIL.
Used to select the
variable broil mode
UPand DOWN ARROWS
Used to set thè clock, thè timer
and thè oven temperature
BAKETIME
Used to enter the
length of the
baking time.
Used with BAKE, OVEN COOK
TIME, and CLEAN to program
delayed baking or delayed self­
cleaning cycle stop time.
TIMER
Used to set or cancel
the minute timer. The
minute timer does'nt
start or stop cooking.
CLEAR
Used to clear any oven
mode previously
entered except the
time of day and the
minute timer. Push
clear to stop cooking.
CLOCK
Used to set the
time of the day.
Note: Push buttons or pads may be shaped differently.
Note: After the appliance is first plugged in, or after a power interruption, the clock must be set
to the correct time of day before the rest of the electronic control functions will operate.
The oven can be programmed for:
• Conventional baking and roasting
• Convection baking and roasting
• Timed baking and roasting (conventional and convection) with automatic on and off times.
• Vari broiling
• Self-cleaning
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for
silent operation. Push and hold STOP TIME. After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pushed. To return the sound, push and hold STOPTIME again for 7 seconds until a beep is heard.
10