beautypg.com

Assembling side burner shelf, continued, Installing side burner valve, Figure 5 c – Kenmore 122.166489 User Manual

Page 8: Figure 4, Figure 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Assembling Side Burner Shelf, Continued

5.

Hang side burner shelf on side panel by placing side

burner slotted screw holes over the 2 screws and

washers loosened in Step 3 (Fig. 4). Fix shelf to

panel with the (2) Phillips head screws and lock

washers removed in step 2 (Fig. 5, C).

6.

Fully tighten the (2) screws loosened in step 3 (Fig.

5, D)

Installing Side Burner Valve
1. Locate the igniter wire hanging from side burner and

plug it into the open socket in igniter module. (Fig. 6)

Note: If there is more than one open socket, call

800-913-8999 for assistance.

2. Locate the small wire emerging from the igniter

module and connect it to the terminal on the side

burner valve (Fig. 7).

3. Remove two screws and washers from front of side

burner valve (Fig. 8, A)

4. Insert rear stem of side burner valve into burner tube

hole (Fig. 8, B).

Figure 5

C

5. Insert bezel in front of side burner front panel, Insert

front stem of side burner valve through hole in side

burner control panel (Fig. 8, A.), Insert and tighten

the (2) screws and washers from step 3 through the

control panel bezel and into the side burner valve
(Fig. 8, A).

6. Push side burner control knob onto side burner valve

control stem. Secure knob to stem by using included
hex wrench to tighten set screw (Fig. 9)

7. Insert and tighten screw, washer and lock washer

removed in step 4 of Assembling Side Burner Shelf
(Fig. 5, E).

' A

I--"”’

'■,% . 1

1

' 1 1

Figure 4

Figure 6

' *9

f