beautypg.com

Light operation instructions, A warning, Halogen bulb replacement – Kenmore 122.166489 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Light Operation Instructions

1 .Make sure the light power switch on the control

panel is in the “OFF” position.

2.Turn the light power switch to “OFF.”

A

WARNING

Keep any electrical supply cord away from any

heated surface.

Halogen Bulb Replacement

1 .Make sure that the grill has cooled before changing the

light bulb.

2.Make sure the light’s power switch on the control panel

is in the “OFF” position and power plug is disconnected

from the outlet.

S.Use a Phillips screwdriver to loosen 8pcs screws & 8pcs

washers securing the light rear cover on the left end and
the right end as Picture A shown.

NOTE: When removing final screw from lamp rear cover,
make sure to use other hand to hold the cover in place,

ensuring it doesn’t fall and damage.

Picture A

Picture B

0

1

o

o

4. Loose one screw securing the light glass cover ,.

also need to use other hand to hold the cover,
ensuring it doesn’t fall and shatter.

As shown in Picture B

5.Remove the glass cover from the light bulb housing.

See Picture C&D.

Picture C

HINT: Use a flathead screwdriver to open it easily.

Picture D

6. Use a flathead screwdriver to loosen the four screws

locking the bulb in place.

Loosen but do not remove four screws from light first as

picture E shown.

Picture E

\\^

m

1 2