Instructions press display, To set warm & hold, To set warm & hold to turn on automatically – Kenmore 790.4662 User Manual
Page 28: Setting oven controls (confd), Setting the warm & hold^“ feature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Oven Controls (confd)
Setting the Warm & Hold^“ Feature
The Warm & Hold
pad turns ON the Warm & Hold feature and will maintain an oven temperature of 170°F
(77°C). The Warm & Hold feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished.
After 3 hours the Warm & Hold feature will shut the oven OFF. The Warm & Hold feature may be used without any other
cooking operations or can be used after cooking has finished using BAKE, CONVECTION BAKE .
The Warm
&
Hold feature may be used with TIMED BAKE if you wish to have the Warm
&
Hold feature turn ON
automatically when cooking has finished. The Timed Bake features require you to set start time and the amount of
cooking time. With this information the control can calculate the time when cooking will complete and can then start the
Warm
&
Hold feature automatically.
INSTRUCTIONS
PRESS
DISPLAY
To set Warm & Hold
1. Arrange interior oven racks and place food in oven. If the food is
already in the oven go to step
2.
P r a c - Q
f W
arms
'
riw&ij V H
old
HLd" will appear in the display (Figure 1).
Note: If no pad is touched within 25 seconds the request to turn
ON Warm
&
Hold feature will be cancelled.
3.
Press
Q
taro
.
The oven icon
will
appear in the display (Figure
2).
4. To turn the Warm & Hold OFF at any time press
or
Note: The Warm & Hold feature will automatically turn OFF after
3 hours.
Figure 1
HLd
Figure 2
To set Warm
&
Hold to turn ON automatically
1. Arrange interior oven racks and place food in oven. Set the oven
properly for Timed Bake or Delayed Timed Bake.
2
.
"HLd" will appear in the display (Figure 3).
Press
Note: If no pad is touched within 25 seconds the request to turn
ON Warm
&
Hold feature and all functions previously programmed
will be cleared.
3. Press C^TA^. "HLd" will disappear and the temperature will be
displayed (Figure 4). The Warm & Hold mode is set to turn ON
automatically after Timed Bake has finished (See Figure 1).
4. To turn the Warm & Hold feature OFF at any time press
again.
Note: The Warm & Hold feature will automatically turn OFF after
3 hours.
Pressing at any time will stop all oven baking operations.
Figure 3
350
Figure 4
28