Kenmore 790.4662 - Manual (Page 18)

Setting Oven Controls (con’t)
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL ( br ^ and FLEX CLEAN (¿Sy pads control the Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1 . To teli if thè display is set for Fahrenheit or Celsius press
(Figure 1) and hold for 7 seconds; "550°" will appear
and "BROIL" will flash in the display and a beep will sound. If
"F" appears, the display is set to show temperatures in
Fahrenheit (Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
Press to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2 ) or "C"
(Figure 3).
to reject the Press QTARy to accept the change or press i
change.
PRESS DISPLAY
ion ccn
lOu 3 j u
BROIL
( broiu
Figure 1
for 7 seconds
I.-30 f
Figure 2
f F lex A
V^LEAfW
I '
30
c
start ! or I
Figure 3
18