Kenmore 790.4662 - Manual (Page 23)

The COTrarPsd is used to automatically convert a standard baking recipe for convection baking. When set properly, this
feature is designed to display the actual converted (reduced) temperature in the display.
Convection Convert may ONLY be used with a Bake, Timed Bake, Delayed Start or Delayed Timed Bake setting. When
used with a Timed Bake, a Delayed Timed Bake setting, the Convection Convert feature will display a “CF” for check
food when the bake time is 75% complete (see Figure 4). At this time the oven control sound 3 beeps at regular
intervals until baking has finished. When the bake time has completely finished the control will display “End” and will
sound 3 beeps every 30 seconds until the (Mffl is pressed (see Figure 5).
Setting Oven Controls (confd)
Setting Convection Convert Feature
INSTRUCTIONS PRESS DISPLAY
Using Convection Convert (Bake) feature to
automatically adjust oven temperature (example: below
when setting oven for 350T)
1 . Arrange interior oven racks and place food in oven.
2. Press (B^ - - will appear in the display (Figure 1).
3. Press C^- "BAKE" will flash and "350°" will appear (DCD®
in the display (Figure 2). If a Timed Bake or a Delayed Timed Bake
is desired, enter time now.
4. Press "CONV", "BAKE" and the oven temperature
adjustment will appear in the display (for this example 325°F). A
beep will sound once the adjusted oven temperature is reached. The
display will show "325°", "CONV", "BAKE" and the fan icon (Figure
3).
Note: The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating (See
rotating fan in Figure 3).
C onvert
Figure 1
J U J J U
Figure 2
:30S3?S’
Figure 3
iiliKlII.
Figure 4
2^30 End
Press to cancel Convection feature at any time.
Figure 5
Note: The minimum amount of cook time using the Convection Convert
feature with a Timed Bake or a Delay Timed Bake is 20 minutes.
23