Setting convection bake, General convection bake instructions, Instructions – Kenmore 790.4662 User Manual
Page 22: Press, Display, 0@i335, Setting oven controls (confd)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Oven Controls (confd)
Setting Convection Bake
The CONVECTION BAKE
pad controls the Convection Bake feature.
Use the Convection Bake feature when cooking speed is desired. The oven can
be programmed for Convection baking at any temperature between 300“ F (149“
C) to 550“ F (288“ C).
Convection baking uses a fan to circulate the oven's heat evenly and
continuously within the oven (See Figure 1 ). This improved heat distribution
allows for fast, even cooking and browning results. It also gives better baking
results when using
2
or 3 racks at the same time. Breads and pastries brown
more evenly. Convection bake cooks most foods faster, more evenly and at
lower temperatures than conventional bake.
General Convection Bake Instructions
1. Convection Bake Time reductions will vary depending on the amount and
type of food to be cooked. Cookies and biscuits should be baked on pans
with no sides or very low sides to allow heated air to circulate around the
food. Food baked on pans with a dark finish will cook faster.
2. The oven control automatically reduces the convection bake temperature
called for in a conventional bake recipe.
3.
Preheating is not necessary when cooking casseroles with Convection Bake.
4. When using Convection Bake with a single rack, place oven rack in position
2 or 3. If cooking on multiple racks, place the oven racks in positions 2 and
4.
5. Cakes have better results when baked using the Food Categories CAKES pad.
Benefits of Convection Bake:
—Some foods cook up to 30%
faster, saving time and energy.
—Multiple rack baking.
—No special pans or bakeware
needed.
INSTRUCTIONS
To set the oven for Convection Bake (example:
conventional baking recipe calls for 350°F)
1. Arrange interior oven racks and place food in oven.
2
.
Press (
ba
^- "CONV BAKE" will flash and
will appear
in the display (Figure 3).
3.
Press (^'
3
'^
CE)
BAKE" will keep flashing
and "350°" will appear in the display (Figure 4).
4.
Press (|
ta
^."CONV BAKE" and the oven temperature
PRESS
DISPLAY
Figure 3
( D C D ®
350”
adjustment will appear in the display (for this example it is
325°F). A beep will sound once the adjusted oven temperature
is reached. The display will show "350“", "CONV BAKE" and
the fan icon (Figure 5).
Note: The oven icon will show a rotating fan within the square.
This rotating fan icon indicates when the Convection Fan is
operating (See rotating fan in Figure 5).
Press to stop Convection Bake or cancel Convection Bake at
any time.
Figure 4
0@I335"
Figure 5
Note: As soon as the
pad is pressed the set temperature
will be decreased by 25“F (13“C).
22