Operation, Clock and timer – Kenmore 911.92485 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KéhmòrM
OPERATION
Clock and Timer
WiN.
^5fr-!5s.
^IP
The
CLOCK
and
TIMER
are set by
using the touch pads The
TIMER
wil
not control any oven operation.
1
.
Press the
CLOCK
pad
CLOCK
twice to make the display
,
flash.
^ . 2.
Press the
muBmmmE
or OOWM pads to set
•
the time of day The colon
will flash white you are set
ting the time,
The dock will automatically start keep
ing time within one minute or you may
press the
CLOCK
pad for immediate
start.
The
TIMER
is only a minute timer I! wil
not control oven operations. The maxi
mum time you may set is 11 hours and
59 minutes.
aiiMEn
i OWOFF
1.
Press the
TIMER ON/OFF
pad- ”0:00'* and the Timer
V, .. indicator light will flash.
■'V
2.
Press the
HOUR/
.. ■■
J^my
ye
yp
or
DOWH
• - arrow pads to set the time
• ,y you prefer to use The co
lon witi flash while you are
setting the time
After releasing the arrow pad, the timer
indicator light and the coion will blink
three to five times, the timer wiii start the
count down. The Timer Indicator Light
will remain on until countdown reaches
"
0
” .
When the timer has started the count
down, you may press the
CLOCK
pad
to return to the current time of day,
At the end of the countdown, the control
will beep and the Timer Indicator Light
will flash. Press the
TIMER ON/OFF
pad
If you have selected an amount of time,
but decide to change it:
If the countdown is showing in the
display, press the MiHyTE^OyR
UP
or
DOWN
arrow pad Select the
desired time,
If the time of day clock or temperature is
showing in the display, press the
TIMER ON/OFF
pad Then, press
either the
MiUmEiHOUR OP
or
down
arrow pad. Select the desired
time.
If you wish to cancel the
TIMER,
press
the
TIMER ON/OFF
pad once. If the
countdown is not showing, press the
TIR/IER ON/OFF
pad twice -
10