Kenmore Automatic Washers User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

LAUNDRY TUB DRAIN SYSTEM

Check location where washer will be
instalkid. This washer can be installed

using one of three systems:

• Laundry tub drain system (below)

• Standpipe drain system (p. 12)

• Floor drain system (p. 12)

Do not store or operate washer at or
below 32°F (some water may remain in

washer). See page 31 for Winterizing

Information.

Proper installation is your responsibility.

Make sure you have everything necessary
for correct installation including the

following points:

Grounded receptacle:

Must

be within 4 feet of where the
power cord is attached to the
back of the washer.

Hot and cold water faucets:

Must provide water pressure
between 5-100 psi and be

within 4 feet of the hot and

water, and load weight).