Kenmore 415.16218 - Manual (Page 12)

Sidebumer Assembly
□ Place sidebutner body onto legs. Secure at front with one wing screw through leg, tool holder, and into body.
□ insert tab on sideburner frame into hole in body. At rear leg. Insert carriage bolt through frame, body, and middle leg hole.
Secure with metal wing nut.
□ insert sideburner tube into large frame hole. Insert burner^s threaded stud into small frame hole. Attach metal wing nut to
stud, but do not fully tighten.
□ insert sideburner valve into burner tube and snap valve cup into body. Note proper tube-to-valve engagement in figure A.
Once proper engagement is made, fully tighten metal wing nut beneath burner.
□ Attach sideburner ignitor wire (long wire behind control panel) to electrode beneath sideburner. See figure B.
□ Press sideburner knob firmly onto sideburner valve and place sideburner grate onto body.
12 > 463845504