Kenmore 415.16218 - Manual (Page 11)

End Cap, Side Shelf, Tool Holder and V-bar Assembly
□ insert end caps into ends of leg tubes.
□ Position side shelf onto tight legs as shown
below and secure with four wing screws.
□ Position tool holder onto left front ieg and
secure with two carriage bolts and plastic
wing nuts. Use the two outer holes. Do not
use the middle hole.
□ Place V-bar into grill bottom, resting on supports
at each end.
ILiLiaJ
32
Qty.4
Side Shelf
End Cap
/
Tool-'
Holder
32
463845504*11