beautypg.com

Assembly instructions, Assembling grill cart – Kenmore 640-26629611-0 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Assembly Instructions

CAUTION:

While it is possible for one person to

assemble this grill, obtain assistance from another
person when handling some of the larger, heavier
pieces

1. Open lid of shipping carton and remove top

sheet of cardboard. Lay cardboard sheet on floor
and use as a work surface to protect floor and grill
parts from scratches.
2. Remove packing materials from shipping carton.
3. You may slice the carton front corners with a
utility knife to lay open the carton front panel. This

will allow you to raise the grill head lid and remove
the components packed inside the head.

Note: Be sure to slide grease tray out of back of
grill head and remove all packaging from tray.

4. Use the parts list to check that all parts have

been included.
5. Inspect the grill for damage as you assemble it.
Do not assemble or operate the grill if it appears
damaged. If there are damaged or missing parts

when you unpack the shipping box, or you have

questions during the assembly process, call:

For Assembly Questions, call 1-800-913-8999

8AM - 5 PM PST, Monday through Friday.

Assembling Grill Cart

1. Attach four casters to bottom panel using (16) 1/4

x15mm Phillips head screws, (16) 1/4 lock washers.

Note: A is Swivel with Brake Caster, B is swivel
caster, C & D are straight casters. (Fig.1)

2. Attach left & right side panels to bottom panel

using (4) 5/32 x 8mm Phillips head screws with (4)
5/32 lock washers. (Fig.2)
3. Attach back panel to side panel & bottom panel
using (3) 5/32 x 8mm and (4) 1/4 x 10mm Phillips
head screws with (3) 5/32 & (4)1/4 lock washers.
(Fig.3)

4. Remove (4) 5/32 x 8mm Phillips head screws
from door handles, then attach door handles to
doors using the screws that were removed. (Fig.4)
5. Attach doors to side panels using (8) 5/32 x 8mm
flat head screws. (Fig. 5)

Figure 1

^

Figure 2

B

' 1

D

hi

c

Figure 3

Figure 4

Figure 5

8

This manual is related to the following products: