Figure 17, Figure 18, Installing grease cup – Kenmore 640-26629611-0 User Manual
Page 11: Figure 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Assemble the 2 longer pieces gas of the tank heat
shield bracket A to gas tank heat shields using (2) 5/32
X 8mm Phillips head screws with (2) 5/32 lock washers
from up to down (Fig. 16 A)
Installing Gas Tank Heat Shield
Figure 17
2. Assemble the 2 shorter pieces of the gas tank heat
shield bracket B to gas tank heat shields as above, but
assembly screws need to from down to up, finish
preassembling the complete gas tank heat shield (Fig.
16 B).
3. Attach gas tank heat shield bracket A other end to
back panel using (2) 5/32 x 8mm Phillips head screws
with (2) 5/32 lock washers as shown (Fig. 17)
<.
4. Attach gas tank heat shield bracket B to cart frame
using (2) 5/32 x 8mm Phillips head screws with (2) 5/32
lock washers as shown (Fig. 18)
Figure 18
Installing grease cup
From the back, pull out grease tray, remove any
packaging materials from it, then replace grease
cup into grease tray as shown in (Fig. 19). Push
grease tray back into grill.
Figure 16
"i:
O
.6 ‘
0 '''y'
Figure 19
11