Extension hose assembly, Power cord, A warning – Kenmore ASPIRADORA 116.31591 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EXTENSION HOSE ASSEMBLY

1. While aligning tabs on extension hose

assembly to corresponding slots in lower

hose port, insert extension hose assembly

into lower hose port.

Extension
Hose

Assembly

Tab

2. Rotate extension hose assembly as
shown until it locks into place.

3. Push extension

hose handle into

extension hose

holding bracket.

POWER CORD

1. Make sure that the upper cord hook is
rotated in the upright position as shown.

2. Wrap power cord loosely around cord

hooks.

3. Lock power cord plug onto the power
cord.

A WARNING

Electrical Shock and Personal Injury

Hazard

Wrapping the cord too tightly puts stress
on the cord and can cause cord damage.
A damaged cord is an electrical shock

hazard and could cause personal injury

or damage.

Power Cord
Plug

Lower

Cord

Hook