Clog removal, Ik warning – Kenmore ASPIRADORA 116.31591 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CLOG REMOVAL

ik WARNING

Electrical Shock And Personal Injury Hazard

Disconnect electrical supply before performing maintenance to the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum cleaner

suddenly starting.

CLOG REMOVAL FLOOR/TOOLS
SELECTOR VALVE

1. Remove

_ valve selector
■ijJ cover ring by

Tab

squeezing two
(2) release

tabs and

pulling toward

you.

2. Grasp valve

knob and pull

toward you.

3. Clean and

remove any

lint or debris

from inside
floor/tools
selector valve
and lower

hose.

4. Remove Lower

Hose from Selector

Valve by
squeezing Hose in
area shown and

moving side to side

while pulling.

NOTE: Hose is

flexible and may
collasp while squeezing. This is normal
and does not damage it.

5. Clean Lower

Hose and Selector

Valve as

necessary.

Replace Lower
Hose on to

Selector Valve.
Make sure Lower

Hose is fully

inserted.

6. Insert valve

knob into

opening. Align to

position shown

and push inward

until it seats.

7. Replace valve

selector cover

ring by aligning

tabs and pushing

inward until it

clicks.