Ik warning, Grounding instructions – Kenmore 790.3693 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

For personal safety, the cooktop must be properly grounded. For maximum

safety, the power cord must be plugged into an electrical outlet that is
correctly polarized and properly grounded.

DO NOT Operate the cooktop using a 2-prong adapter or an extension

cord. If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a properly
grounded 3-prong wall receptacle installed by a qualified electrician.

See the INSTALLATION INSTRUCTIONS packaged with this cooktop for
complete installation and grounding instructions.

Grounding instructions

Grounding

type wall

receptacle

Do not, under any

circumstances, cut,

remove, or bypass

the grounding

prong.

Power supply

cord with 3-prong

grounding plug

ik WARNING

¡This

appliance is equipped with a 3-prong grounding

plug foryourprotection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove

the grounding prong from this plug.

ik WARNING

I Avoid fire hazard or electrical

shock. DO NOT use an adapter plug, an
extension cord, or remove grounding prong

from electrical power cord. Failure to follow this
warning can cause serious injury, fire or death.

Conversion to Liquefied Petroleum Gas (or L.P. Gas)

This natural gas range is designed to allow for conversion
to Liquefied Petroleum (L.P.) Gas.

Only a qualified service agent should perform the L. P.
conversion. Contact the local gas provider for conversion.
The L. P. Conversion Kit is supplied with this range and
is located on the main back of the range. The kit contains
installation instructions which must be read before and

followed carefully when installing the kit.

WARNING

Personal injury or death from electrical shock

may occur if the range is not installed by a qualified installer

or electrician.

WARNING

To avoid serious injury, any additions,

changes or conversions required in order for this appliance
to satisfactorily meet the application needs must be made by
a qualified service agent.