Kenmore 790.3693 - Manual (Page 12)

Control Pad Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
familiar with the various functions of the oven as described below.
For satisfactory use of your oven, become
CLOCK SET COOK TIME UP and DOWN ARROW PADS— Used BAKE PAD—Used
PAD— Used PAD— Used to along with the function pads to select oven to select the bake
to set the enter the length of femperafure, cook fime, sfarf fime (when funcfion.
time of day. the baking time. programming an automatic start time), time of
day, clean fime and minufe fimer.
OVEN INTERIOR
LIGHT PAD—
Used to turn oven
interior light ON or
OFF. '
SELECT CLEAN
PAD— Used to
select the Self­
Cleaning cycle. A
2, 3 or 4 hour Self­
Clean fime may be
selecfed.
TIMER SET/OFF PAD—
Used to set or cancel the
minute timer. The minute
timer does not start or stop
cooking. Also,
TIMER SET/OFF pad is
used to set the Continuous
Bake feature.
2 I O I
Select I Timer i
Clean I Set/Off I
Delay
Start
• OVEN
• PREHEAT
• DOOR LOCKED
DELAY START
PAD— Used to set
the desired start
time for baking &
Self-Clean. May be
used
with COOK
TIME to program a
delayed bake cycle.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The “OVEN”
light will glow each time the oven turns on to maintain the set oven
temperature. The “PREHEAT” light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The “DOOR LOCKED” light will flash when
the oven door locks and unlocks or when using the Self-Clean cycle
or when the oven lockout is activated. The indicator light will glow
constantly after the door locks.
FEATURE INDICATOR
LIGHTS— These light to
show which feature is in
use.
BROIL PAD—
Used to select
the variable broil
function.
WARM & HOLD
PAD— Used to set
the Warm & Hold
feature.
STOP PAD— Used
to clear any function
previously entered
except the time of
day and minufe fimer.
Press STOP to stop
cooking. Also the
STOP pad is used
to activate oven door
lockout setting.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the pre­
heat indicator light turns OFF, your oven has reached the set temperature.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold . After 5 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return to normal sound operation, press and hold again for 5 seconds until the
control beeps once.
'
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press Broil. “-------” appears in the display.
2. Press and hold the until “HI” appears in the display.
3. Press and hold Broil until °F or °C appears in the display.
4. Press the or '\/' to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
12