To set warm & hold, To set warm & hold™ to turn on automatically, Setting oven controls (cont’d) – Kenmore 790.3693 User Manual
Page 18: Adjusting the oven temperature, Setting the warm & hold™ feature, Hold
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Warm & Hold™ Feature
The
turns ON the Warm & Hold™ feature and will maintain an oven temperature of 170° F (77°C). The Warm
& Hoi#'“ feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the
Warm &
Hold''''“
feature will shut the oven OFF automatically. The Warm & Hold™ feature may be used without any other
cooking operations or can be used after cooking has finished using TIMED BAKE or DELAY START BAKE.
Setting Oven Controls (cont’d)
To set Warm &
Hold™:
1. Arrange interior oven racks and place baked food in oven. If the food is already in the oven go to step 2.
2. Press
Warm &
Hold
3.
4.
. “------” will appear in the display and the Warm & Hold™ indicator light above the pad will turn ON.
Note: If no further pads are touched within 6 seconds the request to turn ON Warm & Hold™ will be cleared.
Press or N/" to start.
To turn Warm & Hold OFF at any time press © . The Warm & Hold indicator light above the pad will turn OFF.
To set Warm &
Hold™
to turn ON automatically:
1. Arrange interior oven racks and place food in oven. Set the oven properly for Timed Bake or Delay Start Bake.
2. Press
oH^ --------- ” will appear in the display and the Warm & Hold™ indicator light above the pad will turn ON.
3. To turn Warm &
Hold™
OFF at any time press
(
stop
)-
The Warm &
Hold™
indicator light above the pad will turn OFF.
Adjusting the Oven Temperature
Your oven control has been precisely set at the factory. This setting may differ from your previous oven however, so your
recipe times may not give you the results you expect. If you think that the oven is cooking too hot or too cool for your
recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed.
To Adjust Oven Temperature:
1. Press
Bake.
2. Set the temperature to 550°F (287°C) by pressing and holding the
3. Within 2 seconds, press and hold
Bake
until the 2 digit display appears. Release
Bake.
The display now indicates
the amount of degrees offset between the original factory temperature setting and the current temperature setting. If
the oven control has the original factory calibration, the display will read “0”.
4. The temperature can now be adjusted up or down 35°F or 19°C, in 5°F or 1°C steps by pressing and holding the
or N/". Adjust until the desired amount of offset appears in the display. When lowering the oven temperature,
a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of
degrees.
5. When you have made the desired adjustment, press
(
stop
)
to go back to the time of day display.
Note: Oven temperature adjustments made will not change the Self-Cleaning feature temperature.
18